Research Projects
Helmholtz-Program-oriented Funding:
Materials and Technologies for the Energy Transitions (MTET)
Topic 5 - Resource and Energy Efficiency
Public funded projects:
Ongoing Projects
- GreenFeed - Green Feedstock for a Sustainable Chemistry
- PFAS - Basic investigations on thermochemical degradation of PFAS in laboratory and pilot plants to determine optimum combustion conditions for the thermal treatment of PFAS-containing waste materials
- URBAN - CO2-reduced concrete by upcycling residues from waste concrete processing
- CO2Valorize - Supplementary Cementitious Materials (SCMs) from Waste Concrete: Carbonation Kinetics in a semi-dry Stirred Reactor
- FINEST MINERAL ADDITIVES - Recycling options for plastic additives
- AmOszi - Reduction of nitrogen oxides formation by the oscillating combustion of ammonia as a carbon-free energy carrier
- R-Zement - Low-CO2 processing of the clinker mineral dicalcium silicate from recycled building materials
- AI-Tool for predictive process optimization and control for medium-sized process plant operators (KI-Tool)
- SEKO - Energy system integration & sector coupling using the example of the research infrastructures Energy Lab 2.0 and Living Lab Energy Campus
- REPOST - Recycling Cluster Aerated Concrete: Subproject 4: Dicalcium silicate from autoclaved aerated concrete residues from demolition
Completed Projects
- ReFoPlan - Development of Dismantling and Recycling-Standards for Rotor Blades
- FLUFF - Provision of experimentally proven CFD-models for the thermal conversion of refuse derived fuels
- CFC - Carbon Fibre Cycle Carbon fibres in circular economy - release behaviour and toxicity due to thermal and mechanical treatment
- BioOszi - Reduction of NOx-emissions in small combustion plants for energetic utilization of biomass via oscillating combustion air supply
- SprayCalc - Calculation Tool for Characterization of Thermodynamic and Reaction Behavior of Sprays for Design of Chemical Engineering Processes
- KUBA - Sustainable Plastic Value Chain - Pilot Case Plastics in Construction and Buildings
- Process 4.0 - Ultra-efficiency and digitization Part 4: Resource efficiency through digitization in the process industry
- NOMECOR - Novel hybrid method of copper recovery from flotation dumps, Subproject 3: Use of mineral residues for cement production