Furnace lab
Description
Our furnace lab makes use of a range of different furnaces and kilns – as an example the lab rotary kiln is shown above.
The main purpose is the synthesis of hydraulic binders, i.e. cement, from raw meal. Especially, the formation of belite at low temperatures (up to 1000°C) and in controlled gas atmospheres is under investigation. All the furnaces can be attached to a gas analyser for reaction control.
| Furnace parameters | |
|---|---|
| 1 Three-Area-Furnace: Therm Concept ROT70/600/13-3z | |
| Heating | electric |
| Atmosphere | gas tight, inert gas possible |
| Heated length | 600mm (3 areas) |
| Max. temperature | 1300°C |
| Working temperature | 1250°C |
| Inner tube diameter | 60mm |
| 2 Linn High Therm VMK 250S für Chargenbetrieb | |
| Heating | electric |
| Special features | fibre insulation, water cooled door |
| Atmosphere | gas tight, inert gas possible |
| Max. temperature | 1050°C |
| Working temperature | 1000° |
| Volume | 15 L |
| 3 Rotary kiln Heraeus ROF 7/75 | |
| Heating | electric |
| Heated length | 500mm (1 area) |
| Special features | gas tight tube endings, inert gas |
| Max. temperature | 1300°C |
| Working temperature | 1250°C |
| Inner tube diameter | 60 mm |